Age related impairments in ingestion from a large population based-sample.

OBJECTIVES: Epidemiological data regarding the evolution of problems related to mastication and swallowing with age are lacking. This study aims to (i) describe changes in oral function with age, using data from a large French population, (ii) validate online, self-report uses of an ICF questionnaire in older persons, and (iii) assess whether impairment is related to avoidance of certain foods, xerostomia, body mass index (BMI) and oral health related quality of life (OHRQoL). METHODS: Volunteers aged ≥18 years with internet access completed a series of questionnaires on sociodemographic, anthropometric and oral health characteristics (oral function, Xerostomia Index (XI), OHRQoL, reasons for avoidance of certain food). Oral function was assessed using items derived from the International Classification of Functioning (ICF). Five ICF items related to ingestion function and six items related to activities and participation were used. A validation study was undertaken to identify those with poor chewing ability and low salivary flow amongst older participants reporting impairment. FINDINGS: 39 597 individuals were included. The prevalence of individuals with impairment for ICF items related to ingestion function and oral activity (eating, drinking and speaking), and the percentage of participants with poor OHRQoL increased significantly with age (p < 0.001). Each ICF item was significantly associated with OHRQoL (p < 0.001), XI (p < 0.001), BMI (p < 0.001) and avoidance of certain food due to chewing or swallowing difficulties. CONCLUSION: Overall, 21.5% and 13.5% of the study population had chewing and/or biting impairments respectively, which might affect food selection and consumption. These findings raise individual and population-based issues. Further studies are needed to assess whether impairment in oral function might increase frailty in older individuals, and also to compare data with those from other countries.

Accuracy of conventional impressions and digital scans for implant-supported fixed prostheses in maxillary free-ended partial edentulism: An in vitro study.

OBJECTIVES: To evaluate the accuracy of conventional polyether impressions and digital scans produced by five intra-oral scanners (IOSs) in maxillary free-ended partial edentulism for long-span implant-supported prostheses. METHODS: This in vitro study involved the impression of a maxillary model with free-end partial edentulism, in which six implants were placed before digitization using a desktop scanner to generate a digital reference model. Conventional impressions (Impregum Penta Soft, 3M) and digital scans with five IOSs (Trios 3 and 4, 3Shape; Primescan, Dentsply-Sirona; CS 3600, Carestream Dental; and i-500, Medit) were obtained. Conventional impressions were digitized using the same desktop scanner. Each digital STL file of conventional or digital impressions was superimposed over the reference STL file to enable comparison. Trueness was assessed by calculating angles and distance deviations. For precision, dispersions of values around their means were also measured. RESULTS: The mean distance deviation was significantly higher for conventional impressions (454.24 ± 334.70 µm) than for IOSs (ranging from 160.98 ± 204.48 µm to 255.56 ± 395.89 µm) (p < 0.001). The mean angular deviation was high with conventional impressions (1.82 ± 1.51°), intermediate with CS 3600 (1.38 ± 1.42°), Primescan (1.37 ± 2.54°) and Trios 4 (1.30 ± 0.64°) scanners, and lower with I500 (0.97 ± 0.75°) and Trios 3 (1.01 ± 0.85°) scanners (p < 0.001). The dispersion of distance values around their means was lowest with Trios 3 and i-500, followed by CS3600, Primescan, and Trios 4, respectively, and higher for conventional impressions (p < 0.001). The dispersion of angular values was smallest with i-500, Trios 3, and Trios 4 compared with other groups and was highest with Primescan (p < 0.001). CONCLUSIONS: Within the limits of the current study, Trios 3 scanner exhibited the highest accuracy, followed by i-500, Trios 4, CS 3600, Primescan, and conventional impressions respectively. IOSs might be reliable for the fabrication of an implant-supported prosthesis. In vivo studies are required to confirm these findings. CLINICAL SIGNIFICANCE: Passive adaptation of the implant-supported framework is a challenge when rehabilitating patients with maxillary free-end partial edentulism. While Conventional impressions remain a reliable and validated technique, but IOSs demonstrated higher accuracy, suitable for the fabrication of long-span implant-supported prostheses in partially edentulous arch.

Time efficiency and cost analysis between digital and conventional workflows for the fabrication of fixed dental prostheses: A systematic review.

STATEMENT OF PROBLEM: Time and cost are factors that influence a patient's decision on dental prosthetic treatment. Evidence is needed to demonstrate that restoration using digital systems is more rapid and less costly than the conventional process. PURPOSE: The purpose of this systematic review was to analyze and compare the duration and cost of fixed dental prostheses fabricated using digital and conventional methods from scanning or impression making to delivery of the prosthesis. MATERIAL AND METHODS: A systematic review was performed following the Preferred Reporting Items for Systematic Reviews and Meta-Analysis Protocol (PRISMA-P 2015) guidelines. The analysis methods and inclusion criteria were documented in a protocol registered in the Prospective International Register of Systematic Reviews (PROSPERO) (CRD42023458734). The bibliographic search was carried out using PubMed, Cochrane, and PROSPERO databases. The main keywords used were (Prosthodontic OR restorative dentistry OR denture) AND (CAD CAM OR Digital workflow OR Computer Dentistry OR Digital Design) AND (Economic OR cost OR Financial OR time efficiency). Two investigators undertook the different steps of article selection. RESULTS: A total of 8 articles published between 2010 and 2023 were found for the qualitative synthesis by using the search criteria. Two studies showed that conventional impressions took more time than digital scans for the fabrication of a single crown, and 1 study showed the opposite. One study found that a digital scan was faster than conventional impression making for the fabrication of a 3-unit fixed partial denture, and another study showed the opposite. The dental laboratory technician spent more time on the conventional workflow than the digital workflow for the 3-unit framework and veneering process. No difference was found between conventional and digital workflows for clinical evaluation and chairside adjustment for the fabrication of a single crown. No articles have compared the cost of fixed prostheses. CONCLUSIONS: The digital pathway can shorten the laboratory process. However, the duration of the impression or scan may vary depending on the technique used. Studies are needed to analyze the cost-effectiveness of the fabrication of tooth-supported restorations.

Does malocclusion affect ingestion: a systematic review.

OBJECTIVES: The multifactorial aspect of malocclusions and their consequences on ingestion function is rarely described in the literature. The aims of this review are (i) to investigate the relationship between oral ingestion and malocclusion and (ii) to gather malocclusion tools that could help screen subjects at risk of malocclusion-related ingestion disorders. MATERIAL AND METHODS: A systematic review was performed following the Preferred Reporting Items for Systematic Reviews and Meta-Analysis Protocol (PRISMA-P 2015) guidelines. The analysis methods and inclusion criteria have been documented in a protocol published in the Prospective International Register of Systematic Reviews (PROSPERO) under the registration number CRD42023395840. The bibliographic search involved the PubMed®, Cochrane and PROSPERO databases. RESULTS: A total of 29 articles published between 2007 and 2023 were retained by the search criteria for the qualitative synthesis. Twenty of the studies found that the severity of malocclusion has a negative impact on oral ingestion. This review highlights that malocclusion and ingestion impairments are associated but it is not possible to determine causality due to the observational approach of many of the studies. CONCLUSION: Malocclusion has a negative impact on ingestion function. During orthodontic consultations, particular interest should be directed towards chewing, biting, and swallowing disorders, which can affect patients' nutritional status. This review offers arguments for designing further studies assessing the extent to which malocclusions may affect nutritional status. CLINICAL RELEVANCE: Orthodontic treatment should focus on improving patients' ingestion.

Accuracy of Conventional and Digital Impressions for Full-Arch Implant-Supported Prostheses: An In Vitro Study.

Both conventional and digital impressions aim to record the spatial position of implants in the dental arches. However, there is still a lack of data to justify the use of intraoral scanning over conventional impressions for full-arch implant-supported prostheses. The objective of the in vitro study was to compare the trueness and precision of conventional and digital impressions obtained with four intra-oral scanners: Trios 4 from 3Shape®, Primescan from Dentsply Sirona®, CS3600 from Carestream® and i500 from Medit®. This study focused on the impression of an edentulous maxilla in which five implants were placed for implant-supported complete prosthesis. The digital models were superimposed on a digital reference model using dimensional control and metrology software. Angular and distance deviations from the digital reference model were calculated to assess trueness. Dispersion of the values around their mean for each impression was also calculated for precision. The mean distance deviation in absolute value and the direction of the distance deviation were smaller for conventional impressions (p-value < 0.001). The I-500 had the best results regarding angular measurements, followed by Trios 4 and CS3600 (p < 0.001). The conventional and I-500 digital impressions showed the lowest dispersion of values around the mean (p-value < 0.001). Within the limitations of our study, our results revealed that the conventional impression was more accurate than the digital impression, but further clinical studies are needed to confirm these findings.

Dental Criteria Could Alert for Malnutrition Risk and Inappropriate Choice of Food Texture in Older Subjects with Dementia: An Analytical Cross-Sectional Study.

Oral health indicators are usually collected to alert for the presence of infectious diseases, but the impact of poor oral health on the nutritional status of older people with dementia is often neglected. This study aims to explore the relationship between the number of posterior dental functional units (PFUs) and the anthropometric measure of malnutrition, the mid-upper arm circumference (MUAC), in older people with dementia while controlling for other variables, and to analyze whether the number of PFUs is considered when adjusting the texture of the food provided at mealtimes. A total of 103 individuals who were 70 years or older with dementia were recruited from seven institutions. Cognitive impairment was assessed using the Mini Mental State Examination. Data were collected from medical records (sociodemographic characteristics, presence of chronic diseases, prescribed medications, results of serum albumin level), as well as questionnaires (type of feeding routes, type of food texture, supplements intake, Activity of Daily Living index), clinical examinations (MUAC), and oral health parameters (PFUs, oral dryness, oral hygiene). MUAC was the dependent outcome variable. MUAC was associated with the number of PFUs (p = 0.032); participants with PFU ≤ 4 were 7.5 times more likely to have MUAC < 21 cm than others. Other associations were found between MUAC and albumin level (OR = 12.5; p = 0.001), modified food texture (OR = 4.2; p = 0.035), and length of institutional stay (OR = 5.2; p = 0.033); however, the type of oral feeding was not significantly related to the number of PFUs (p = 0.487) so there is an inadequate correlation between food texture and oral health status. Similar to MUAC, the number of PFUs could be an oral anthropometric criterion that is recorded during routine hygiene care to alert for the risk of malnutrition and the inappropriate choice of food texture in older individuals with dementia.

Relationship between Oral Health Status and Oropharyngeal Dysphagia in Older People: A Systematic Review.

The purpose of this review is to investigate the relationship between oral health status and oropharyngeal dysphagia (OD) in older people and to collect a list of oral health indicators that can enable carers and health professionals to screen for risk of dysphagia in older people during oral examinations. A systematic review was performed following the Preferred Reporting Items for Systematic Reviews and Meta-Analysis Protocol (PRISMA-P 2015) guidelines. The analysis methods and inclusion criteria were documented in a protocol published in the Prospective International Register of Systematic Reviews (PROSPERO) under the registration number CRD42020140458. A total of 19 articles published between 2002 and 2020 were retained by the search criteria for the qualitative synthesis. Eighteen studies demonstrated at least one positive association between an oral health component (dental, salivary and/or muscular) and dysphagia. This review highlights that oral health and OD are associated but was not able to determine causality. The lack of scientific evidence could be explained by the observational approach of the majority of the studies and the irrelevant choice of oral health indicators. A relationship may exist between oral health and dysphagia, but this review highlights the lack of valid and standardized oral health indicators that would be needed to assess the impact of oral health on the overall health status of individuals.

Fit and retention of complete denture bases: Part I - Conventional versus CAD-CAM methods: A clinical controlled crossover study.

STATEMENT OF PROBLEM: Clinical evidence is sparse on whether dentures fabricated by computer-aided design and computer-aided manufacturing (CAD-CAM) methods afford superior fit and retention when compared with those fabricated conventionally. PURPOSE: The purpose of this clinical controlled crossover study was to evaluate the peak retention force and fit of CAD-CAM manufactured (3D-printed and milled) maxillary complete denture bases and conventional heat-polymerized bases (control). MATERIAL AND METHODS: Twenty participants with edentulous maxillary arches were recruited. Impressions were made with a border-molded custom tray, and the resulting definitive cast was scanned. The conventional base was manufactured on the definitive cast with a hook and a 45-degree platform with a central notch and 2 lateral notches. The scan of the definitive cast was used for the fabrication of a milled and a printed base. The platform and hook position on the conventional base were transferred digitally to the milled and printed bases. All bases were scanned. A traction dynamometer was orientated into the notches, and retention was evaluated in the post dam and tuberosity areas. Scans were imported into a comparison software program which matched scans to their corresponding reference and performed a 3-dimensional comparison. The Friedman and Wilcoxon tests were used to compare between groups (confidence interval: 95%, α=.05). RESULTS: Nineteen participants with a mean ±standard deviation age of 64.1 ±14.7 years completed all clinical sessions. No significant difference in peak retention was measured between milled (MB1), printed (PB1), and conventional (CB) bases in the post dam (CB: 12.44 ±9.62 N, PB1: 16.08 ±15.28 N, MB1: 14.52 ±17.07 N) and right tuberosity area (CB: 8.99 ±7.82 N, PB1: 11.28 ±9.57 N, MB1: 11.99 ±12.10 N). In the left tuberosity area, peak retention was lower for CB (10.03 ±8.39 N) than PB1 (14.98 ±14.72 N) and MB1 (13.55 ±15.53 N; P=.05). Compared with the definitive cast, the fit of the conventional base (0.18 ±0.01 mm) was closer than the printed (0.21 ±0.03 mm) and milled bases (0.21 ±0.02 mm) (P<.001). CONCLUSIONS: The CD bases manufactured by CAD-CAM techniques provided retention and fit similar to that of conventionally manufactured bases and can therefore be considered suitable techniques.

Assessment of infrazygomatic crest dimensions in different vertical facial growth types for miniscrew insertion: A cone-beam computed tomography study.

INTRODUCTION: This study aimed to assess the depth and height of the infrazygomatic crest (IZC) located in the posterior maxilla at the junction with the zygomatic process in patients with different vertical facial growth types as a potential miniscrew insertion site. METHODS: The sample consisted of cone-beam computed tomography scans of 117 patients (42 males and 75 females), with a mean age of 22.9 ± 2.7. The population was divided into 3 groups according to the measured SN-GoGn angle: Decreased facial proportions (n = 28), average facial proportions (n = 62), and increased facial proportions (n = 27). Bone depth was assessed at 5 levels: apex, 1, 2, 3, and 4 mm vertically from the apex. The measurements were performed on the mesiobuccal and distobuccal roots of the first molar and the mesiobuccal root of the second molar. Repeated-measure analysis of variance followed by univariates analyses and Bonferroni multiple comparisons were performed to compare the mean bone thickness between groups. The IZC height was assessed through a vertical line ranging from the furcation of the maxillary first molar to the sinus floor. Analysis of variance followed by Tukey (honestly significant difference) post-hoc tests was used to compare the mean height between groups. RESULTS: Mean bone depth between the 3 groups were significantly different at the mesiobuccal root region of the first molar at all the measured levels. It was smaller for average, intermediate for decreased, and elevated for increased facial proportions. No statistical difference was shown at the distobuccal root of the first molar except for the apex level and the mesiobuccal root of the second molar except for the apex and 4 mm levels. The mean bone height was significantly different between subjects with increased facial proportions and the 2 other groups. CONCLUSIONS: Subjects with increased facial proportions tend to present a longer and deeper IZC followed by decreased facial proportions, then average facial proportions.

Fit and retention of complete denture bases: Part II - conventional impressions versus digital scans: A clinical controlled crossover study.

STATEMENT OF PROBLEM: Although the intraoral scanning of edentulous ridges is feasible, clinical evidence that the resulting denture retention is equivalent to that achieved with conventional impressions is lacking. PURPOSE: The purpose of this clinical study was to determine the retention of complete denture bases fabricated from digital intraoral scans versus conventional impressions by using border molding and posterior palatal seal compression. MATERIAL AND METHODS: Twenty volunteers with an edentulous maxilla were recruited. An intraoral scan of the maxilla and a conventionally border-molded impression with a custom tray were made. The conventional impression was poured; the definitive cast was scanned. Three-dimensionally (3D) printed (PB1) and milled bases (MB1) were fabricated based on the scan of the definitive cast. Based on the intraoral scan, a 3D-printed (PB2) and a milled base (MB2) were fabricated. On each base, a platform with a hook consisting of a central notch orienting the force against the post dam (PD) and 2 lateral notches orienting the forces against the left (LT) and right (RT) tuberosities was set in the center of the outer surface of the base. A traction dynamometer was inserted in the hook and oriented into the corresponding notch by applying force until dislodgement. All bases were subsequently stored in artificial saliva for 2 weeks and scanned. Retention testing was repeated by using the same procedure. To evaluate trueness and to visualize the differences on a color map, the scan of the definitive cast and the intraoral scans were matched and compared in 3 dimensions. The Wilcoxon tests were used to compare the retention of the different bases (95% confidence interval, α=.05). RESULTS: Nineteen participants with a mean ±standard deviation age of 64.1 ±14.7 years completed the 4 study sessions. The retention of printed bases (PD: 16.08 ±15.28 N; LT: 14.98 ±14.72 N; RT: 11.28 ±9.57 N) and milled bases (PD:14.52 ±17.07 N; RT: 11.99 ±12.10 N; LT: 13.55 ±15.53 N) fabricated from conventional impressions presented significantly higher retentive forces than those printed (PD: 6.21 ±4.72 N; RT:5.12 ±2.78 N; LT: 4.45 ±2.77 N) and milled (PD: 6.58 ±4.92 N; RT: 4.65 ±2.63 N; LT: 5.02 ±3.58 N) from the intraoral scans (P<.05). The differences were significant in all directions of dislodgement, as well as after storage in artificial saliva for 2 weeks. Comparison of the 3D distances between the intraoral scan and the definitive cast revealed a mean deviation of 0.45 ±0.11 mm. CONCLUSIONS: Conventional impressions of the edentulous maxilla, including the clinical steps of border molding and posterior palatal seal compression, provide better retention than digital intraoral scans with both milled and 3D-printed denture bases.

Validation of the French version of COHIP-SF-19 among 12-years children in New Caledonia.

BACKGROUND: Assessment of oral health-related quality of life is now associated to clinical indicators in epidemiological studies. This study aimed at validating the French Short Form of the Child Oral Health Impact Profile (COHIP-SF-19) and assessing the impacts of oral diseases among schoolchildren in New Caledonia (NC). METHODS: A sample of 12-years-old children (n = 971) was selected in 2019 in NC using a random, stratified, and clustered sampling technique. Children filled the French COHIP-SF-19 questionnaire. Information on sociodemographic characteristics, oral hygiene habits, perception of oral health problems were also collected through self-administered questionnaires or from the schools' database. Dental status (dental caries, gingival status, and dental functional units) was clinically recorded at school by four calibrated examiners. Cronbach's alpha and intraclass correlation coefficients (ICC) were calculated. Kruskal-Wallis tests and spearman correlations were used along with multilevel mixed models taking into account the cluster and examiner effects. A confirmatory factor analysis was conducted and sensitivity analyses were performed. RESULTS: Among the 693 children examined, 557 children were included. Oral diseases were frequent in the study population 40% had dental caries and 55% presented gingivitis. The COHIP scores ranged from 7 to 76 (57.9 ± 9.96) with 96.4% of the children having experienced oral health problems, 81.7% reporting functional impacts and 90.5% socio-emotional impacts. Overall, the French COHIP-SF-19 showed satisfactory psychometric characteristics. Internal consistency was high (Cronbach's alpha = 0.80) and reproducibility excellent (ICC = 0.9). Discriminant and concurrent validity were adequate. Indeed, children with less optimal social situation, impaired dental status, declaring severe dental problems or difficulties in accessing oral health care showed lower COHIP-SF-19 scores. Factor analyses suggested a four-component structure with identification of a new domain (self -image) and changes in the repartition of the items within the original domains. Sensitivity analyses showed similar results for children with partial or complete answers in the COHIP questionnaire. CONCLUSIONS: The French COHIP-SF-19 showed satisfactory psychometric characteristics and allowed to identify the high impacts of oral diseases in New Caledonian children, namely for socially deprived children.

Lack of Correlation Between the Penetration of Two Types of Sealers and Interfacial Adaptation to Root Dentine.

OBJECTIVE: This study aimed to determine the correlation between sealer penetration into dentinal tubules and interfacial adaptation to root canal walls using a hydraulic calcium silicate-based sealer, Endosequence Bioceramic Sealer (Brasseler USA, Savannah, GA, USA), and an epoxy resin-based sealer, AH Plus (Dentsply DeTrey, Konstanz, Germany). METHODS: Sixty-four maxillary central incisors were endodontically prepared with nickel-titanium rotary instruments and randomly assigned into two groups (n=32). Roots were filled with gutta-percha using a single-cone technique in conjunction with one of the two sealers, AHP or BCS. Sealers were mixed with Rhodamine B and analysed under a confocal laser scanning microscope. Transverse sections at 5 mm from root apex were obtained. The circumference of the root canal wall was first outlined and measured to determine the circumferential percentage of sealer penetration. The regions along the canal walls where the sealer had penetrated the dentinal tubules were delineated and measured. Then, the outlined distances were divided by the canal circumference. The width of each gap was measured and pooled for each specimen for comparison to determine the interfacial adaptation. The measurements were repeated twice to ensure reproducibility. Mann-Whitney tests were performed to compare continuous variables between AHP and BCS groups. The correlation between gap width and percentage of sealer penetration was investigated using the Spearman correlation coefficient. RESULTS: No significant difference was observed between groups regarding the percentage of sealer penetration (P>0.05) and the gap width (P>0.05). Also, there was no significant correlation between the two variables analysed for AHP (r=0.165; P>0.05) and BCS (r=-0.147; P>0.05) and in the overall sample (r=0.061; P>0.05). CONCLUSION: The present results show no correlation between interfacial adaptation and sealer penetration in dentinal tubules in the total sample and among sealer subgroups. The ability of root canal sealers to penetrate dentinal tubules cannot be considered a sign of better interfacial adaptation.

Injury patterns among national-level athletes in Lebanon: a retrospective study.

OBJECTIVES: This study aims to assess the annual prevalence, associated factors, and characteristics of musculoskeletal disorders among Lebanese national-level athletes. METHODS: Lebanese athletes aged 18 and over and who competed in a top-level national championship during an entire athletics season were invited to participate in the study. Data were collected through questionnaire assessing self-reported injury during the past year. Injury, dependent variable of the study, was defined as a musculoskeletal condition that made the athlete partially or completely abstains from training or competition for a 1-week minimum injury period. RESULTS: Among the 250 eligible athletes, 210 (84.0%) (25.5±6.7 years) completed the questionnaire. The 1-year retrospective injury prevalence was 51.9% (95% confidence interval, 45.1%-58.7%). Injured athletes reported 150 injuries: 128 (85.3%) affected the lower extremities, and 111 (74.0%) occurred during training. The most common type was muscle cramps/spasm (n=53; 35.3%); and overuse (n=121; 80.7%) was the predominant cause. Athletes who mainly practiced endurance disciplines (-p-value=0.042), who participated in international athletics championships (-p-value=0.047), and who were taking chronic medications (-p-value=0.049) had more injuries in the past year. CONCLUSION: These findings may help inform potential injury prevention programs, which should target injuries affecting the lower extremities, and consider the factors associated with injury risk among Lebanese athletes.

Binge eating among young adults: association with sociodemographic factors, nutritional intake, dietary n-6:n-3 ratio and impulsivity.

Binge eating behaviour (BE) is the major symptom of binge eating disorder (BED). This study aimed to compare the nutritional intake in the presence or absence of BE, with a particular focus on dietary n-6:n-3 ratio, to assess the association between BE and impulsivity and the mediating effect of BMI on this association. A total of 450 university students (age 18-28 years) participated. The self-administered questionnaires were a semi-quantitative FFQ and the UPPS-P Impulsive Behavior Scale and the binge eating scale. The average BE score was 11·6 (se 7·388), and 20 % of the total participants scored above the cut-off of 17, thus presenting BE with 95 % CI of 16·3, 23·7 %. Our study revealed that greater BMI, higher total energy intake, greater negative urgency and positive urgency scores were significantly associated with BE. Participants with high value of dietary n-6:n-3 ratio were 1·335 more at risk to present a BE compared with those with a lower value of this ratio (P = 0·017). The relationship between BE score and UPPS domains score was not mediated by the BMI. This is the first study reporting a link between high dietary n-6:n-3 ratio and BE as well as the fact that BE was linked to both, negative and positive urgencies, and that the association between BE and impulsivity was not mediated by BMI. These findings can help to deal more efficiently with people suffering from BE, a symptom that can precede the development of BED.

Comparison of psychometric properties of GOHAI, OHIP-14, and OHIP-EDENT as measures of oral health in complete edentulous patients aged 60 years and more.

OBJECTIVES: To compare the psychometric properties of three OHRQoL indicators (GOHAI, OHIP-14, and OHIP-EDENT) in a group of complete edentulous subjects and to explore the ability of these instruments to distinguish between individuals with different prosthetic and oral health status. METHODS: This was a cross-sectional study. Edentulous individuals aged 60 years and more were recruited between January 2019 and February 2020 in a medical and dental care centers. The Lebanese versions of GOHAI, OHIP-14, and OHIP-EDENT were used. External and internal consistencies were assessed using intraclass correlation coefficient (ICC) and Cronbach alpha, respectively. The concurrent validity was evaluated by testing the indicators against a proxy measure of a similar concept. To test their discriminative abilities, the ADD (GOHAI and OHIP) and SC (GOHAI and OHIP) scores were dichotomized according to the 25th and 75th percentile, respectively, and multivariate analyses were performed using sociodemographic, clinical, and subjective health parameters as explanatory variables. RESULTS: Two hundred and two edentulous subjects (age: 72.94 ± 7.378 years) were included. The proportion of subjects with no impact was lower for OHIP-EDENT (7.9%) compared to GOHAI (28.2%) and OHIP-14 (38.6%). Reproducibility was satisfactory for all OHRQoL tools since they were able to reproduce the results consistently in time (ICC > 0.80). The Cronbach alpha values were greater than 0.8 indicating acceptable internal consistency. The concurrent validity of the three tools was acceptable since subjects with lower OHRQoL score were less satisfied with their dentures and reported a higher need for self-rated therapy. Concerning the discriminant validity, OHIP-EDENT was more discriminant than OHIP-14 and GOHAI, since it was more able to identify patients with poor prosthetic issues or using instable denture. CONCLUSION: The OHIP-EDENT was more effective in identifying edentulous individuals with oral and prosthetic problems. Our results can help decide which dental instrument to use to assess the perception of oral health in edentulous individuals. More prospective studies are required to compare their evaluative properties.

[Impact of orthodontic treatment and psychological parameters on oral health related quality of life of children in Middle Eastern country]. / Impact du traitement orthodontique et des paramètres psychologiques sur la qualité de vie liée à la santé orale chez les enfants au Moyen-Orient.

This study is aimed at evaluating the Oral Health Related Quality of Life (OHRQoL) in adolescents aged 11-14 years-old during orthodontic therapy and 18 months after the start of treatment and the possible role of psychological parameters. Sixty patients were recruited, and data were collected using self-administrated questionnaires and intraoral clinical examinations. The questionnaires included sociodemographic characteristics (age, gender), the Lebanese version of the Child Perception Questionnaire between 11 and 14 years CPQ11-14 to assess the OHRQoL, the Discrepancy Aesthetic Index (DAI) for malocclusion, and the Child Health Questionnaire « CHQ-CF87 ¼ to appraise Self-Esteem (SE) and Psychological Well-Being (PWB). The mean scores of CPQ11-14 and its four subdomains were significantly better for participants with high SE /PWB compared to those with low SE / PWB at baseline. These same scores improved significantly during orthodontic treatment (p < 0.001). However, DAI was significantly better in patients with low self-esteem and psychological well-being. Our findings showed improvement in oral health perception and psychologic parameters during orthodontic treatment. Investigators should consider the need to control the psychological parameters of patients when assessing orthodontic treatment need and improvement in OHRQoL during orthodontic treatment.

Oral health status and care of institutionalized elderly individuals in Lebanon.

BACKGROUND: Oral health of the elderly is a major public health challenge. Data on oral health and dental care of the institutionalized elderly is lacking in Lebanon. AIMS: (1) Assess the oral health of Lebanese people aged 65 years and over living in residential facilities; and (2) identify factors associated with poor oral status. MATERIALS AND METHODS: A.sample of 526 nursing home residents aged 65 years and older was randomly selected from 46 residential facilities. Information collected were sociodemographic characteristics, degree of autonomy regarding toilet use and nutrition, presence of chronic diseases and medications, dry mouth sensation, dental brushing, access to oral health and reasons of dental visits. A structured oral examination was conducted to gather data on DMFT index, oral hygiene indices modified gingival index, and the unmet need for prosthesis. Statistical methods included bivariate and multivariate analyses. RESULTS: 55.9% of the participants were edentates, 41.4% used partial and/or complete dentures, and the minority used dentures with good hygiene. 15% of the dentate sample reported regular tooth brushing, 7% reported to have visited the dental office in the past 12 months, and 57% presented an unmet need for prosthesis. Oral health status was significantly related to age, smoking, daily tooth brushing, and autonomy (P < 0.05). Subjects with chronic diseases and consuming medications were more likely to have xerostomia. CONCLUSION: Oral health status is poor in the elderly institutionalized Lebanese population, which should promote a multidisciplinary team sharing responsibility for daily oral hygiene and access to dental treatment.

Effect of 2 Heat-treated Nickel-Titanium Files on Enlargement and Deformation of the Apical Foramen in Curved Canals: A Scanning Electronic Microscopic Study.

INTRODUCTION: The aim of this study was to evaluate under scanning electronic microscopy the enlargement and deformation of the apical foramen of curved mesiobuccal roots with both reciprocating and rotary single-file systems made of a newly heat-treated alloy through the use of Reciproc Blue (REC Blue; VDW, Munich, Germany) and XP-endo Shaper (XPS; FKG Dentaire, La Chaux-de-Fonds, Switzerland). METHODS: Forty mesiobuccal roots of mandibular and maxillary molars presenting a curvature ranging from 20°-40° were used in this study. The apical foramens were initially scanned with a scanning electronic microscope under 200× magnification. Roots were divided into 2 groups (n = 20): the REC Blue group instrumented with the REC Blue system and the XPS group instrumented with the XPS system. Both groups were instrumented at the foramen. The apical foramens were scanned after root canal preparation. The area, circularity, and ratio of the Feret diameters were calculated from each image. The Kolmogorov-Smirnov, Mann-Whitney, and Wilcoxon tests were used for statistical analysis (P ≤ .05). RESULTS: The area of the foramen increased significantly after canal shaping with REC Blue and XPS. The variation of the area was significantly greater with XPS. However, there were no significant differences in circularity and the ratio of the Feret diameters with both instruments. CONCLUSIONS: No transportation was found when using REC Blue and XPS. The newly heat-treated nickel-titanium alloy did not promote deformation of the apical foramen in curved canals.

Assessment of caries on the first permanent molars in a group of seven- to thirteen-year-old schoolchildren: Comparison of DMF and ICDAS systems.

OBJECTIVES: The objective of this study was to compare ICDAS and DMFT/S in the evaluation of caries status of the first permanent molar in 200 children aged 7 to 13 years. METHODS: This was a cross-sectional design study. Participants were selected from two private schools in Lebanon. The examinations were performed by two trained and calibrated examiners using a dental mirror and a WHO probe. The number of decayed (D), missing (M) and filled (F) teeth was recorded in DMFT/S form, and the numbers related to D, M and F were then added to record the DMFT/S value (D1MFT/S, D2MFT/S and D3MFT/S). In the ICDAS, the assessment of caries associated with restorations and sealant was recorded. Student t tests/and Mann-Whitney tests were used to compare the continuous variables. Chi-square tests and Fisher exact tests were used to compare the categorical variables. RESULTS: The average age of the participants was 9.21 ± 1.927 (7-13 years old). No significant difference was found between the mean time to score DMFT, DMFS and ICDAS indices (-p-value > 0.05). The prevalence of caries with D1MFS, D2MFS and D3MFS was 80.5%, 54% and 30.5%, respectively. However, the prevalence of caries with ICDAS II was 77.5%. CONCLUSION: The DMF index is an international user-friendly system that shows the carious history of teeth. However, the ICDAS assesses the different stages of caries and describes the restorative status of the tooth, promoting new preventive approaches and curative needs. More studies should be done to confirm these findings.

Evaluation of Chronotype Among Children and Associations With BMI, Sleep, Anxiety, and Depression.

Objectives: To evaluate possible associations between chronotype, weight, sleep problems, anxiety, and depression among children from 6 to 12 years of age. Method: One-hundred children aged between 6 and 12 years were randomly recruited in five pediatrician clinics in the capital city of Beirut, Lebanon. The protocol was approved by the ethics committee of Saint-Joseph University and Hotel-Dieu Hospital and an informed written formal consent was obtained from one of the parents. The Sleep Disturbance Scale for Children (CCTQ), the Revised Child Anxiety and Depression Scale (RCADS)-Parent version, and the Children's Chronotype Questionnaire (CCTQ) were used. Results: The majority of the sample (47%) presented an intermediate chronotype. There was a shift toward evening chronotype with increased age and a significant association between electronic devices use and an evening chronotype. Higher sleep disturbances were also observed among children with an evening chronotype. In particular, disorders of initiating and maintaining sleep, non-restorative sleep, excessive somnolence, and total SDSC were significantly higher among evening type children in our study. Finally, major depression domain scores were significantly higher among children with an evening chronotype. Conclusions: Several findings of this study are important and explain factors associated to chronotype in children. Two important future perspectives can be highlighted: limiting electronic devices use among children in an effort to reduce circadian rhythm disturbances and identifying and treating sleep problems associated with eveningness, taking into account the possible presence of major depression among this population.